Number | X-pin, colour | Description |
---|---|---|
X2421 | 9-pin, grey | Plug connector DDE control unit II/slave Module 1 |
X2422 | 24-pin, grey | Plug connector DDE control unit II/slave Module 2 |
X2423 | 52-pin, grey | Plug connector DDE control unit II/slave Module 3 |
X2425 | 9-pin, grey | Plug connector DDE control unit II/slave Module 5 |
Pin | Type | Description / Signal type | Connection / Measuring notes |
---|---|---|---|
1 | E | Voltage supply terminal 15/30 | Fuse carrier, engine electronics |
2 | Not used | ||
3 | Not used | ||
4 | M | Ground | Ground connector |
5 | M | Ground | Ground connector |
6 | M | Ground | Ground connector |
7 | E | Connection DDE control unit I/master | DDE control unit I/master |
8 | E | Voltage supply terminal 15/30 | Fuse carrier, engine electronics |
9 | Not used | ||
Pin | Type | Description / Signal type | Connection / Measuring notes |
---|---|---|---|
1 | Not used | ||
2 | Not used | ||
3 | Not used | ||
4 | Not used | ||
5 | Not used | ||
6 | E/A | Diagnostic link TXD | AGS transmission control unit |
7 | Not used | ||
8 | Not used | ||
9 | Not used | ||
10 | Not used | ||
11 | Not used | ||
12 | Not used | ||
13 | A | Signal Changeover valve for exhaust gas recirculation (EGR) 2 | Changeover valve for exhaust gas recirculation (EGR) 2 |
14 | Not used | ||
15 | Not used | ||
16 | Not used | ||
17 | Not used | ||
18 | Not used | ||
19 | Not used | ||
20 | A | Signal Changeover valve for exhaust gas recirculation (AGR) | Changeover valve for exhaust gas recirculation (AGR) |
21 | Not used | ||
22 | Not used | ||
23 | Not used | ||
24 | Not used | ||
Pin | Type | Description / Signal type | Connection / Measuring notes |
---|---|---|---|
1 | A | Supply Hot-film air mass meter I | Hot-film air mass meter I |
2 | E | Signal Hot-film air mass meter I | Hot-film air mass meter I |
3 | M | Ground Hot-film air mass meter I | Hot-film air mass meter I |
4 | E | Signal, camshaft sensor | Hall-effect sensor, camshaft 1 |
5 | Not used | ||
6 | E | Signal Speed (rpm) sensor | Speed (rpm) sensor |
7 | Not used | ||
8 | Not used | ||
9 | Not used | ||
10 | Not used | ||
11 | E | Signal Intake air temperature | Hot-film air mass meter I |
12 | Not used | ||
13 | Not used | ||
14 | A | Supply for boost pressure sensor | Boost pressure sensor |
15 | E | Signal Boost pressure sensor | Boost pressure sensor |
16 | M | Ground Boost pressure sensor | Boost pressure sensor |
17 | M | Camshaft sensor ground | Hall-effect sensor, camshaft 1 |
18 | Not used | ||
19 | M | Shield Speed (rpm) sensor | Speed (rpm) sensor |
20 | M | Ground Rail pressure sensor | Rail pressure sensor |
21 | Not used | ||
22 | Not used | ||
23 | Not used | ||
24 | Not used | ||
25 | Not used | ||
26 | Not used | ||
27 | Not used | ||
28 | Not used | ||
29 | Not used | ||
30 | Not used | ||
31 | M | Ground Speed (rpm) sensor | Speed (rpm) sensor |
32 | M | Ground Dual temperature sensor | Dual temperature sensor |
33 | E | Signal Rail pressure sensor | Rail pressure sensor |
34 | Not used | ||
35 | A | Supply Rail pressure sensor | Rail pressure sensor |
36 | Not used | ||
37 | Not used | ||
38 | A | Supply Rail pressure control valve | Rail pressure control valve |
39 | Not used | ||
40 | Not used | ||
41 | Not used | ||
42 | A | Speed signal | DDE control unit I/master |
43 | Not used | ||
44 | Not used | ||
45 | Not used | ||
46 | E/A | CAN interface CAN-HIGH (CAN-H) | DDE control unit I/master |
47 | E/A | CAN interface CAN-LOW (CAN-L) | DDE control unit I/master |
48 | M | Shield CAN-bus connector | CAN-bus connector |
49 | Not used | ||
50 | Not used | ||
51 | Not used | ||
52 | Not used | ||
Pin | Type | Description / Signal type | Connection / Measuring notes |
---|---|---|---|
1 | A | Supply Injectors 4 and 7 | Injectors 4 and 7 |
2 | Not used | ||
3 | A | Signal Injector 7 | Injector 7 |
4 | A | Supply Injectors 1 and 6 | Injectors 1 and 6 |
5 | A | Signal Injector 1 | Injector 1 |
6 | Not used | ||
7 | A | Signal Injector 6 | Injector 6 |
8 | Not used | ||
9 | A | Signal Injector 4 | Injector 4 |