A6000 DME control unit

Plug connector overview

Number	X-pin, colour	Description
X60001	9-pin, black	Plug connector DME control unit Module 1
X60002	24-pin, black	Plug connector DME control unit Module 2
X60003	52-pin, black	Plug connector DME control unit Module 3
X60004	40-pin, black	Plug connector DME control unit Module 4
X60005	9-pin, black	Plug connector DME control unit Module 5

Pin assignments at plug connector X60001

Pin	Type	Description / Signal type	Connection / Measuring notes
1	E	Activation Unloader relay terminal 15	Unloader relay terminal 15

2		Not used

3		Not used

4	M	Ground	Ground connector

5	M	Ground	Ground connector

6	M	Ground	Ground connector

7	E	Voltage supply terminal 30	Fuse F1

8	E	Terminal 87	Fuse F2

9	E	Terminal 87	Fuse F2

Pin assignments at plug connector X60002

Pin	Type	Description / Signal type	Connection / Measuring notes
1	M	Oxygen sensor ground	Heated oxygen sensor 1 in front of catalytic converter

2	E	Reversing light signal	Reversing light switch

3	E/A	CAN-bus low	AGS transmission control unit

4	E/A	CAN-bus high	AGS transmission control unit

5		Not used

6	E/A	Diagnostic link TXD	AGS transmission control unit

7	M	Oxygen sensor ground	Heated oxygen sensor 1 behind catalytic converter

8		Not used

9		Not used

10		Not used

11		Not used

12		Not used

13	M	Oxygen sensor ground	Heated oxygen sensor 2 in front of catalytic converter

14	E	Oxygen sensor signal	Heated oxygen sensor 1 in front of catalytic converter

15	E	Oxygen sensor signal	Heated oxygen sensor 2 in front of catalytic converter

16	E	Oxygen sensor signal	Heated oxygen sensor 1 behind catalytic converter

17		Not used

18	E	Oxygen sensor signal	Heated oxygen sensor 2 behind catalytic converter

19	M	Oxygen sensor ground	Heated oxygen sensor 2 behind catalytic converter

20	M	Ground Oxygen sensor heater	Heated oxygen sensor 1 in front of catalytic converter

21	M	Ground Oxygen sensor heater	Heated oxygen sensor 2 in front of catalytic converter

22	M	Ground Oxygen sensor heater	Heated oxygen sensor 1 behind catalytic converter

23	M	Negative activation	DME relay

24	M	Ground Oxygen sensor heater	Heated oxygen sensor 2 behind catalytic converter

Pin assignments at plug connector X60003

Pin	Type	Description / Signal type	Connection / Measuring notes
1	E	Signal, hot-film air mass meter	Hot-film air mass meter

2	E	Signal, camshaft sensor	Camshaft sensor II

3		Not used

4	A	Supply Throttle potentiometer 1, driver's wish 1	Throttle valve

5	E	Signal, camshaft sensor	Camshaft sensor I

6		Not used

7	A	Supply Throttle potentiometer 2, driver's wish 2	Throttle valve

8	E	Signal, crankshaft sensor	Crankshaft sensor

9	E	Signal, driver's wish 2	Throttle valve

10	E	Signal Throttle potentiometer I	Throttle valve

11		Not used

12	E	Voltage signal, terminal 30h	Starter

13	E	Signal, alternator D+ (terminal 61)	Alternator

14	M	Component ground Throttle potentiometer 1, driver's wish 1	Throttle valve

15	M	Camshaft sensor ground	Camshaft sensor II

16	E	Signal, driver's wish 1	Throttle valve

17	M	Ground, hot-film air mass meter	Hot-film air mass meter

18	M	Camshaft sensor ground	Camshaft sensor I

19	E	Signal Throttle potentiometer II	Throttle valve

20	M	Component ground Throttle potentiometer 2, driver's wish 2	Throttle valve

21	M	Ground	Crankshaft sensor

22	E	Signal, temperature sensor	Intake air temperature sensor

23	M	Ground Intake air temperature sensor	Intake air temperature sensor

24	E	Signal, temperature sensor	Dual temperature sensor

25	M	Ground Dual temperature sensor	Dual temperature sensor

26	E	Signal Oil pressure switch	Oil pressure switch

27	A	Signal Oil temperature sensor	Oil temperature sensor

28	M	Ground Oil temperature sensor	Oil temperature sensor

29	E	Sensor 1 signal	Knock sensor

30	M	Sensor ground	Knock sensor

31	E	Sensor 2 signal	Knock sensor

32	M	Sensor ground	Knock sensor

33	M	Negative activation Fuel injector 1	Fuel injector 1

34	M	Negative activation Fuel injector 2	Fuel injector 2

35	M	Negative activation Fuel injector 3	Fuel injector 3

36	M	Negative activation Fuel injector 4	Fuel injector 4

37	M	Negative activation Fuel injector 5	Fuel injector 5

38	M	Negative activation Fuel injector 6	Fuel injector 6

39	E	Signal Oil level sensor	Oil level sensor

40	A	Injection signal VANOS inlet valve	VANOS inlet valve

41	A	Injection signal VANOS exhaust valve	VANOS exhaust valve

42	A	Injection signal Charcoal filter valve	Charcoal filter valve

43	A	Throttle actuator	Throttle valve

44	A	Throttle actuator	Throttle valve

45	E	Signal Thermostat, characteristic map cooling	Thermostat, characteristic map cooling

46	A	Idle actuator closing winding	Idle actuator

47	A	Idle actuator opening winding	Idle actuator

48	M	Shield, knock sensor	Knock sensor

49	M	Injection signal Valve, individual control intake system	Valve, individual control intake system

50		Not used

51		Not used

52	M	Injection signal Secondary air pump valve	Secondary air pump valve

Pin assignments at plug connector X60004

Pin	Type	Description / Signal type	Connection / Measuring notes
1	A	Battery charge indicator lamp signal (terminal 61)	Instrument cluster

2	A	Voltage signal, terminal 30h	Integrated electronic control unit (IKE)

3		Not used

4	E	Signal Electric fan	Electric fan

5		Not used

6		Not used

7		Not used

8		Not used

9		Not used

10	A	Activation, fuel pump relay (EKP)	EKP relay

11	A	Oil pressure indicator lamp	Instrument cluster

12		Not used

13		Not used

14		Not used

15		Not used

16		Not used

17	A	Engine speed signal output (TD)	Diagnostic connector

18		Not used

19	E	Signal Reversing light	Integrated electronic control unit (IKE)

20		Not used

21	A	Signal Oil level sensor	Light module

22	E	Rear right speed signal	ABS/ASC control unit ABS/DSC control unit

23	E	Signal Clutch switch	Clutch switch

24	E	Brake light switch signal	Brake light switch

25		Not used

26	E	Voltage supply, terminal 15	Fuse F24

27	E	Data link MFL	Coil spring

28	E	Brake light test signal	Brake light switch

29	E	A/C compressor signal	Heating and A/C control module

30	M	Ground	Leakage diagnosis pump

31		Not used

32		Not used

33	E/A	Communication link (EWS)	Electronic immobilizer control unit (EWS)

34		Not used

35		Not used

36	E/A	CAN-bus high	CAN link

37	E/A	CAN-bus low	CAN link

38	M	Ground	Coolant outlet temperature sensor

39	E	Signal	Coolant outlet temperature sensor

40		Not used

Pin assignments at plug connector X60005

Pin	Type	Description / Signal type	Connection / Measuring notes
1	A	Suignal, terminal 1	Ignition coil 3

2	A	Suignal, terminal 1	Ignition coil 2

3	A	Suignal, terminal 1	Ignition coil 1

4		Not used

5	M	Ground	Ground point

6	M	Ground	Ground connector X6900

7	A	Suignal, terminal 1	Ignition coil 6

8	A	Suignal, terminal 1	Ignition coil 5

9	A	Suignal, terminal 1	Ignition coil 4