| Pin | Type | Description / Signal type | Connection /
Measuring notes |
|---|
| 1 | A | Cosine winding signal, terminal connection A | EML actuator motor II |
| | | |
| 2 | A | Sine winding signal, terminal connection A | EML actuator motor II |
| | | |
| 3 | A | Cosine winding signal, terminal connection A | EML actuator motor II |
| | | |
| 4 | A | Sine winding signal, terminal connection B | EML actuator motor II |
| | | |
| 5 | A | Ready indication signal, driving speed | Instrument cluster |
| | | |
| 6 | A | EML fault indication signal | Light module |
| | | |
| 7 | | Not used | |
| | | |
| 8 | M | Ground, potentiometer 2 | EML actuator motor II |
| | | |
| 9 | A | 5 V signal, potentiometer 2 | EML actuator motor II |
| | | |
| 10 | A | 5 V signal, potentiometer 1 | EML actuator motor II |
| | | |
| 11 | M | Ground, potentiometer 1 | EML actuator motor II |
| | | |
| 12 | | Not used | |
| | | |
| 13 | | Not used | |
| | | |
| 14 | | Not used | |
| | | |
| 15 | | Not used | |
| | | |
| 16 | | Not used | |
| | | |
| 17 | | Not used | |
| | | |
| 18 | M | Ground, potentiometer 2 | EML actuator motor I |
| | | |
| 19 | A | 5 V signal, potentiometer 2 | EML actuator motor I |
| | | |
| 20 | A | 5 V signal, potentiometer 1 | EML actuator motor I |
| | | |
| 21 | M | Ground, potentiometer 1 | EML actuator motor I |
| | | |
| 22 | | Not used | |
| | | |
| 23 | A | Sine winding signal, terminal connection B | EML actuator motor I |
| | | |
| 24 | A | Cosine winding signal, terminal connection A | EML actuator motor I |
| | | |
| 25 | A | Sine winding signal, terminal connection A | EML actuator motor I |
| | | |
| 26 | E | Terminal 87 | DME relay II |
| | | |
| 27 | A | Cosine winding signal, terminal connection B | EML actuator motor I |
| | | |
| 28 | M | Ground | Ground point |
| | | |
| 29 | A | Cosine winding signal, terminal connection B | EML actuator motor II |
| | | |
| 30 | A | Sine winding signal, terminal connection B | EML actuator motor II |
| | | |
| 31 | A | Cosine winding signal, terminal connection B | EML actuator motor II |
| | | |
| 32 | A | Sine winding signal, terminal connection A | EML actuator motor II |
| | | |
| 33 | | Not used | |
| | | |
| 34 | M | Ground | Ground point |
| | | |
| 35 | | Not used | |
| | | |
| 36 | M | Shield, potentiometer 2 | EML actuator motor II |
| | | |
| 37 | M | Shield, potentiometer 1 | EML actuator motor II |
| | | |
| 38 | | Not used | |
| | | |
| 39 | | Not used | |
| | | |
| 40 | | Not used | |
| | | |
| 41 | | Not used | |
| | | |
| 42 | | Not used | |
| | | |
| 43 | | Not used | |
| | | |
| 44 | | Not used | |
| | | |
| 45 | | Not used | |
| | | |
| 46 | | Not used | |
| | | |
| 47 | M | Shield, potentiometer 2 | EML actuator motor I |
| | | |
| 48 | M | Shield, potentiometer 1 | EML actuator motor I |
| | | |
| 49 | | Not used | |
| | | |
| 50 | | Not used | |
| | | |
| 51 | A | Sine winding signal, terminal connection A | EML actuator motor I |
| | | |
| 52 | A | Cosine winding signal, terminal connection B | EML actuator motor I |
| | | |
| 53 | A | Sine winding signal, terminal connection B | EML actuator motor I |
| | | |
| 54 | E | Terminal 87 | DME relay II |
| | | |
| 55 | A | Cosine winding signal, terminal connection A | EML actuator motor I |
| | | |
| 56 | E/A | Signal, safety fuel cutout | Engine control module II (DME) |
| | | |
| 57 | E | Brake switch signal | AGS transmission control unit |
| | | |
| 58 | | Not used | |
| | | |
| 59 | E | Kick-down switch signal | Kick-down switch |
| | | |
| 60 | | Not used | |
| | | |
| 61 | | Not used | |
| | | |
| 62 | | Not used | |
| | | |
| 63 | E | Main switch signal, cruise control | Main switch, cruise control |
| | | |
| 64 | | Not used | |
| | | |
| 65 | E | Potentiometer 2 signal | EML actuator motor II |
| | | |
| 66 | E | Potentiometer 1 signal | EML actuator motor II |
| | | |
| 67 | A | Sensor 2 signal Oscillator output | Pedal position sensor |
| | | |
| 68 | E | Sensor 2 signal Signal input | Pedal position sensor |
| | | |
| 69 | M | Shield, sensor 2 | Pedal position sensor |
| | | |
| 70 | A | Sensor 3 signal Oscillator output | Pedal position sensor |
| | | |
| 71 | E | Sensor 3 signal Signal input | Pedal position sensor |
| | | |
| 72 | M | Shield, sensor 3 | Pedal position sensor |
| | | |
| 73 | A | Sensor 1 signal Oscillator output | Pedal position sensor |
| | | |
| 74 | E | Sensor 1 signal Signal input | Pedal position sensor |
| | | |
| 75 | M | Shield, sensor 1 | Pedal position sensor |
| | | |
| 76 | E | Potentiometer 2 signal | EML actuator motor I |
| | | |
| 77 | E | Potentiometer 1 signal | EML actuator motor I |
| | | |
| 78 | | Not used | |
| | | |
| 79 | E | Brake switch signal | AGS transmission control unit |
| | | |
| 80 | E/A | Signal, safety fuel cutout | Engine control module I (DME) |
| | | |
| 81 | E | Data link MFL | Coil spring |
| | | |
| 82 | | Not used | |
| | | |
| 83 | | Not used | |
| | | |
| 84 | M | Shield, CAN-bus | Engine control module II (DME) |
| | | |
| 85 | E/A | CAN-bus low | Engine control module II (DME) |
| | | |
| 86 | E/A | CAN-bus high | Engine control module II (DME) |
| | | |
| 87 | | Not used | |
| | | |
| 88 | E/A | Communication link diagnosis TXD | Diagnostic connector |
| | | |