| Pin | Type | Description / Signal type | Connection /
Measuring notes |
|---|
| 1 | A | Terminal 50 | Start relay |
| | | |
| 2 | E | Terminal 30 | Ignition switch |
| | | |
| 3 | | Not used | |
| | | |
| 4 | A | Signal, antitheft alarm system | DME control unit |
| | | |
| 5 | A | Belt signal | Ring coil |
| | | |
| 6 | E | Signal, gearshift position L2 | AGS transmission control unit |
| | | |
| 7 | A | Signal, gearshift position L2 | Cruise control module |
| | | |
| 8 | | Not used | |
| | | |
| 9 | M | Ground | Ground connector |
| | | |
| 10 | E | Voltage supply terminal 30 | Fuse F26 |
| | | |
| 11 | E | Terminal R | Fuse F44 |
| | | |
| 12 | E | Signal, ring coil ignition lock | Ring coil |
| | | |
| 13 | E/A | K-bus signal line | Integrated electronic control unit (IKE) |
| | | |