The following table lists the fault patterns covered in this test module.
The last three columns contain the information on which telephone systems each fault pattern applies to:
1 |
The TCU control unit is without function and cannot be activated via diagnosis either. |
|
C |
2 |
The mobile phone cannot be connected to the vehicle. |
|
C |
3 |
The radio is not muted during a telephone call. |
A |
B |
C |
4 |
The telephone menu cannot be selected. |
A |
B |
C |
5 |
After a terminal change, the telephone menu normally appears. |
|
B |
C |
6 |
The SIM card of the customer is not recognised. |
A |
|
|
7 |
Implausible response of the telephone system on call waiting, brokering, conference circuit. |
|
|
C |
8 |
The caller hears no voice signal (call via hands-free speaking system). |
|
|
C |
9 |
The driver cannot hear the caller. |
A |
|
C |
10 |
Poor voice quality during call via hands-free speaking system: whistling |
A |
B |
C |
11 |
Poor voice quality during call via hands-free speaking system: echo |
A |
B |
C |
12 |
The mobile phone is not charged. |
|
B |
C |
13 |
When the mobile phone is placed in the snap-in adapter, the displayed signal strength falls or disappears. |
|
B |
C |
14 |
The telephone book is not transferred. |
|
|
C |
15 |
The telephone book is only partially transferred. |
|
|
C |
16 |
An SMS is not transferred from the mobile phone to the display. |
|
|
C |
17 |
Initialisation of the Telematic services cannot be started. |
A |
B |
C |
18 |
Initialisation or update of the Telematic services has been interrupted. |
A |
|
C |
19 |
General malfunction when Assist services are used. |
A |
B |
C |
20 |
The red telephone LED lights up. |
|
B |
C |
21 |
No Assist service available. |
|
B |
C |