Test module evaluation

Please enter the applicable items

Test module completed without part replacement

• Combustion misfires due to fuel lack
  
• Secondary faults: combustion misfire remedied by remedying another fault
  
• No cause was found and the only measure was to delete the fault code memory in accordance with the instruction in the test module
  
• No cause was found and as measure. Technical Support was contacted, in accordance with the instruction in the test module
  

Non-electrical causes at the engine

• Engine mechanically defective
  
• Exhaust system mechanically defective
  
• Fuel system mechanically defective
  
• Poor compression
  
• Extraneous air
  
• Variable intake system mechanically defective
  

Ignition coil

• Ignition coil with visible damage
  
• Ignition coil with non-visible damage, cause could be determined by cross-swapping
  
• BREMI ignition coils were fitted
  

Spark plug

• Spark plug with visible damage
  
• Spark plug with non-visible damage, cause could be determined by cross-swapping or replacement
  

Fuel injector

• Fuel injector with visible damage
  
• Fuel injector with non-visible damage, cause could be determined by cross-swapping or replacing
  

Engine management system control

• DME replacement