Repair instructions for 'retainer of middle roof shell towards rear roof shell'

Retainer of middle roof shell towards rear roof shell

Adjust the mounting for the locking pin of the middle roof shell towards the rear roof shell.

Mounting for locking pin

Important information!

On loosening and tightening the bolts, attention must be paid to ensuring that the mounting is not twisted.

1. Carefully loosen the bolt (A) from the mounting
   
2. Adjust the mounting.
   The axis of the roller (C) may be adjusted upwards by a maximum of 1 mm.
   
3. The centre of rotation of the mounting during adjustment is bolt (B). Do not loosen this bolt!
   
4. Carefully tighten bolt (A).
   
5. Check the closing characteristics and protrusion of the middle roof shell towards the rear roof shell; if necessary, repeat the setting.