Compatibility check for USB devices

Systems concerned: ULF-SBX-H for R56/ E65/ E60/ E87/ E90/ E70

The diagnosis of the ULF-SBX-H interface box High is only possible for systems approved by BMW. All information on this topic can be found in the USB product information, published and regularly updated via the Aftersales Assistance Portal (ASAP).

Procedure for compatibility check of the present USB device

1. Download the current version of the compatibility product information from ASAP.
   
2. Compile USB device data:
   
   • Designation of USB device
     
   • If applicable, software version of the USB device
     
3. Compile control-unit data:
   
   • Control unit software version (BMW part number)
     
   This control unit software version is displayed at the start of the test module ”Fault profiles USB device” as well as in the test module ”Read USB device data”. It can be also be read out at the DIS tester at Control unit functions --> Identification.
   
4. Use the USB device data, control-unit data and the product information to determine whether the present USB device is approved by BMW for this vehicle.
   Note: The diagnosis functions offered on the DIS tester apply to recommended USB devices. If the USB device is approved in the product information for restricted use only, the restrictions of the USB device have priority over the diagnosis instructions.