Check of the brake line connections

Check of the brake line connections at the DSC hydraulic unit: DSC5.7, DSC8, DSC 8Plus, DSC MK60 and DSC Mk60E5

 

This test determines whether the brake line connections are correctly connected to the DSC hydraulic unit. To do so, the DIS tester is used to briefly activate the corresponding valves in the DSC hydraulic unit so that when the brake is operated the corresponding wheel can be rotated.

Operations:

  1. Raise the vehicle so that the corresponding wheel can be freely rotated
  2. Press the brake pedal and maintain the pressure
  3. Use the test program to activate the corresponding wheel; the wheel must then turn freely for approx. 1.5 seconds

Note:

A second person is required for this task