Note:
This definition only applies to vehicles with lights switching center 2!
The lamps and/or lamp chambers are defined in the control-module functions according to their geometric position in the vehicle.
This means that the position description of the lamp is composed of front, side or rear and left, center or right.
The position of the lamp chamber is defined with an index and counted starting from the top from the outer horizontal edge of the vehicle towards the inside. The counting continues in the second row from outside to inside. In the case of lamps that are positioned at the front or rear, in the center as well as on the side of the vehicle, the index starts at the top left. If several light bulbs are fitted in one position, counting at this position is from the inside to the outside before moving on to the neighboring chamber.
front left, front right
rear left, rear right
Note:
The status ”without LSZ function” is used for lamp chambers that are physically not present on the vehicle concerned or for lamp chambers that are not activated by the lights switching center itself (e.g. reversing light)!