A6000 Engine control module (DME)

Connector overview

Number	X-pin, color	Description
X60001	9-pin, black	Connector Engine control module (DME) Module 1
X60002	24-pin, black	Connector Engine control module (DME) Module 2
X60003	52-pin, black	Connector Engine control module (DME) Module 3
X60004	40-pin, black	Connector Engine control module (DME) Module 4
X60005	9-pin, black	Connector Engine control module (DME) Module 5

Pin assignments at connector X60001

Pin	Type	Description / Signal type	Connection / Measuring notes
1		Not used

2		Not used

3	A/E	Communication line data link TXD	Transmission control

4	M	Ground	Ground point

5		Not used

6	M	Ground	Ground point

7	E	Terminal 30 voltage supply	Integrated supply module (IVM)

8	E	Terminal 87	Fuse, officials utility vehicle F001

9		Not used

Pin assignments at connector X60002

Pin	Type	Description / Signal type	Connection / Measuring notes
1	E	Heated oxygen sensor signal	Heated oxygen sensor I in front of catalytic converter

2	E	Heated oxygen sensor signal	Heated oxygen sensor II in front of catalytic converter

3		Not used

4		Not used

5		Not used

6	E	Heated oxygen sensor signal	Heated oxygen sensor I behind catalytic converter

7	M	Heated oxygen sensor ground	Heated oxygen sensor I in front of catalytic converter

8	E	Heated oxygen sensor ground	Heated oxygen sensor II behind catalytic converter

9	M	Heated oxygen sensor ground	Heated oxygen sensor II in front of catalytic converter

10	M	Heated oxygen sensor ground	Heated oxygen sensor I behind catalytic converter

11		Not used

12	M	Heated oxygen sensor signal	Heated oxygen sensor II behind catalytic converter

13	E	Heated oxygen sensor signal	Heated oxygen sensor I in front of catalytic converter

14	A	Heated oxygen sensor signal	Heated oxygen sensor II behind catalytic converter

15	E	Heated oxygen sensor signal	Heated oxygen sensor II in front of catalytic converter

16	E	Heated oxygen sensor signal	Heated oxygen sensor I behind catalytic converter

17		Not used

18		Not used

19	E	Heated oxygen sensor signal	Heated oxygen sensor I in front of catalytic converter

20	E	Heated oxygen sensor signal	Heated oxygen sensor I in front of catalytic converter

21	E	Heated oxygen sensor signal	Heated oxygen sensor II in front of catalytic converter

22	E	Heated oxygen sensor signal	Heated oxygen sensor II in front of catalytic converter

23	E	Terminal 85 control	Integrated supply module (IVM)

24		Not used

Pin assignments at connector X60003

Pin	Type	Description / Signal type	Connection / Measuring notes
1	E	Hot-film mass air flow sensor signal	Hot-film mass air flow sensor

2	E	Signal, intake pipe pressure sensor	Intake pipe pressure sensor

3	E	Intake air temperature	Hot-film mass air flow sensor

4	A	Reference voltage, hot-film air mass meter (5V)	Solder connection, voltage supply

5		Not used

6	A	Injection signal	Cyl. 4 fuel injection valve

7	A	Injection signal	Cyl. 5 fuel injection valve

8	A	Injection signal	Cyl. 6 fuel injection valve

9	A	Signal, VANOS valve	VANOS intake solenoid valve, cylinder bank 2

10	A	Signal, VANOS valve	VANOS intake solenoid valve, cylinder bank 1

11	A	Injection signal	Cyl. 7 fuel injection valve

12	A	Signal, cooling characteristic map	Characteristic map, cooling

13	A	Injection signal	Cyl. 1 fuel injection valve

14	M	Ground, analog	Ground splice

15		Not used

16	E	Camshaft position sensor signal	Camshaft sensor I exhaust

17	E	Camshaft position sensor signal	Camshaft sensor II exhaust

18	A/E	Communication link (VVT)	Variable valve timing gear control module

19	A/E	Bi-directional data interface	Solder connector (BSD)

20	A	Signal, VANOS valve	VANOS exhaust solenoid valve, cylinder bank 1

21	A	Signal Evaporative emission valve	Evaporative emission valve

22		Not used

23	A	Signal, VANOS valve	VANOS exhaust solenoid valve, cylinder bank 2

24	A	Injection signal	Cyl. 2 fuel injection valve

25	A	Injection signal	Cyl. 8 fuel injection valve

26	A	Injection signal	Cyl. 3 fuel injection valve

27	E	Crankshaft position sensor signal	Crankshaft position/RPM sensor

28	E	Signal, coolant temperature (positive)	Dual temperature sensor

29	E	Camshaft position sensor signal	Camshaft sensor I inlet

30	E	Camshaft position sensor signal	Camshaft sensor II inlet

31	E	Signal Electric throttle actuator	Electric throttle actuator

32	E	Signal Electric throttle actuator	Electric throttle actuator

33	A	Sensor 1 signal	Knock sensor

34	A	Sensor 2 signal	Knock sensor

35	A	Sensor 3 signal	Knock sensor

36	A	Signal, sensor 4	Knock sensor

37	M	Ground, digital	Ground splice

38	E/A	CAN-bus high	Variable valve timing gear control module

39		Not used

40	A	Activation, variable intake system	Variable intake system: Position sensor and actuator

41	A	Activation, variable intake system	Variable intake system: Position sensor and actuator

42	A	Signal Electric throttle actuator	Electric throttle actuator

43	A	Signal Electric throttle actuator	Electric throttle actuator

44		Not used

45	E	Signal, position sensor for variable intake system	Variable intake system: Position sensor and actuator

46	A	Sensor 1 signal	Knock sensor

47	A	Sensor 2 signal	Knock sensor

48	A	Sensor 3 signal	Knock sensor

49	A	Signal, sensor 4	Knock sensor

50	A	Signal Electric throttle actuator	Electric throttle actuator

51	A/E	CAN-bus low	Variable valve timing gear control module

52	A	Signal Electric throttle actuator	Electric throttle actuator

Pin assignments at connector X60004

Pin	Type	Description / Signal type	Connection / Measuring notes
1		Not used

2	E	Signal, diagnostic module, fuel tank leakage pump (for USA only)	Diagnostic module, fuel tank leakage

3	A	Activation, secondary air pump relay	Secondary air injection pump relay

4	E	Signal Electric fan	Electric fan

5	M	Ground	Ground splice

6	E	Start signal terminal 50	Ignition switch

7	M	Ground Accelerator pedal module	Accelerator pedal module

8	E	Signal Accelerator pedal module	Accelerator pedal module

9	A	Power Accelerator pedal module	Accelerator pedal module

10	A	Activation, fuel pump relay (EKP)	Fuel pump relay

11		Not used

12	M	Ground Accelerator pedal module	Accelerator pedal module

13	E	Signal Accelerator pedal module	Accelerator pedal module

14	A	Power Accelerator pedal module	Accelerator pedal module

15		Not used

16		Not used

17	A	Engine speed signal output (TD)	OBDII plug

18		Not used

19	A	Activation, E-box fan	E-Box fan

20	E	Signal, diagnostic module fuel tank leakage (for USA only)	Diagnostic module, fuel tank leakage

21	A	Signal Oil pressure indicator	Instrument cluster

22	E	RH rear engine speed signal	ABS/DSC control module

23		Not used

24	E	Brake light switch signal	Brake light switch

25	E	Oil pressure	Oil pressure switch

26	E	Voltage supply, terminal 15	Fuse F31

27	E	Data link MFL	Coil spring

28	E	Brake light test signal	Brake light switch

29	E	A/C compressor signal	Heating and A/C control module

30	E	Signal, diagnostic module, fuel tank leakage pump (for USA only)	Diagnostic module, fuel tank leakage

31		Not used

32	A	Diagnosis signal TXD	OBDII plug

33	E/A	Communication link (EWS)	Electronic immobilizer control unit (EWS)

34		Not used

35		Not used

36	E/A	CAN-bus high	CAN link

37	E/A	CAN-bus low	CAN link

38	M	Ground	Coolant outlet temperature sensor

39	E	Signal	Coolant outlet temperature sensor

40	A	Start signal	Integrated supply module (IVM)

Pin assignments at connector X60005

Pin	Type	Description / Signal type	Connection / Measuring notes
1	A	Terminal 1 signal	Cyl. 3 ignition coil

2	A	Terminal 1 signal	Cyl. 4 ignition coil

3	A	Terminal 1 signal	Cyl. 1 ignition coil

4	A	Terminal 1 signal	Cyl. 7 ignition coil

5	M	Ground	Ground point

6	A	Terminal 1 signal	Cyl. 8 ignition coil

7	A	Terminal 1 signal	Cyl. 2 ignition coil

8	A	Terminal 1 signal	Cyl. 6 ignition coil

9	A	Terminal 1 signal	Cyl. 5 ignition coil