Two sensors are positioned in the front of the vehicle. It is their task to detect crash signals as quickly as possible.
The sensors are monitored by the Safety and Gateway Module (or Safety and Information Module). In the event of a fault, a fault memory entry is entered in the control module.
All work on the airbags must be carried out with the battery disconnected!
Connect and disconnect all BYTEFLIGHT control modules, sensors and generators only with the battery disconnected!
If a fiber-optic cable on the BYTEFLIGHT bus has to be repaired, it must be borne in mind that there may only be one join in a fiber-optic cable. If there is already a join due to a door connector, the fiber-optic cable must not be repaired. In the case of a defect, the fiber-optic cable must be replaced!