The following values are set at the factory in the calibrations:
Idling |
0 rpm |
Exhaust-gas recirculation |
0 mg/stroke |
Limitation delivery |
1 [-] |
Starting fuel delivery |
0 mg/stroke |
Calculated consumption |
0.94 [-] |
Air-mass sensor, idling |
0% |
Air-mass sensor, load |
0% |
The two adjustment values for the air-mass sensor can change during operation if the DDE control module determines deviations in the air-mass sensor characteristic curve.
The remaining adjustment values are set firmly and can only be changed using the corresponding service functions.
Incorrect setting of the calibrations may result in complaints such as black smoke, lack of power or idling problems.