Width offset of the roof shell seals

Repair instruction for width offset of the roof shell seals

Check the offset of the roof shell seals.

1. The offset of the roof shell seals may be a maximum of 1.8 mm. See Fig. 1 and Fig. 2.
   
2. Set the correct offset by bending the shaped part fitted in the seal.
   Note:
   do not remove the seal, as otherwise there is a high risk of creating new leaks!
   

Image 1

Target status:

Offset of the seals, maximum 1.8 mm.

Image 2

Fault status:

Offset of the seals is too large.