Reworking the window cavity cover strip

Repair instruction for reworking the window cavity cover strip

Vehicles with production date up to calendar week 15/2007

  1. Remove the window cavity cover strip.
  2. Cut the window cavity cover strip as shown in Fig. 1
  3. Fit the window cavity cover strip.
  4. Bond the window cavity cover strip and connecting bracket with butyl. See Fig. 2.

Image 1

GR_FB5407069

Cut out the window cavity cover strip as shown above, measured from the corner (1) diagonally upwards to 10 mm from the rear end.

Image 2

GR_FB5407071

(1) Connecting bracket

(2) Use butyl to bond the window cavity cover strip to the connecting bracket.