Bolt securing mechanism on hydraulic cylinder

Repair instruction for 'bolt securing mechanism on the hydraulic cylinder has come loose'

Check the bolt securing mechanism on the hydraulic cylinder.

  1. Open the hardtop until the hydraulic cylinder is accessible. See Fig. 1.
  2. Check that the bolt securing mechanism is present and in the correct position. See Fig. 2 and Fig. 3.

Image 1

GR_FB5407060

Installation location of the hydraulic cylinder.

Image 2

GR_FB5407062

Target status: The bolt securing mechanism (1) must be fitted.

Image 3

GR_FB5407061

Fault status: the bolt securing mechanism is missing and the bolt has slipped.